It is important to follow the steps below carefully to ensure that the stickers do not come away from the wall.
1/ First, clean the surface with soapy water and a cloth.
2/ Thoroughly degrease the area where the sticker is to be placed using the degreasing wipes provided.
3/ Next, use a spirit level to draw a reference line on the wall with a pencil. This can be either horizontal or vertical; for a round sticker, simply mark the top point.
4/ Peel back a small section of the sticker’s backing and position it along your reference line. You can then carefully peel off the rest of the backing whilst smoothing the sticker against the wall. Do not do this too quickly to prevent air bubbles from forming under the sticker.
5/ Use a hairdryer on the hottest setting, holding it close to the sticker, to heat the entire sticker bit by bit, then press it down firmly again with a soft cloth or a squeegee. This heats the adhesive and improves the sticker’s adhesion to the wall.
1. Make sure the surface is clean and flat
2. After cleaning the surface, use the included degreasing wipes
3. Apply the sticker and press it down firmly
4. Use a hair dryer to set the sticker to the surface.
This website was developed with the support of Flanders Investment & Trade.
